Whatsapp
The 33KV Outdoor Circuit Breaker is designed for utility companies, EPC contractors, renewable energy developers, and industrial substations seeking dependable medium-voltage switching with minimal maintenance requirements. Built around advanced vacuum interruption technology, this breaker delivers exceptional fault isolation, operational safety, and long-term reliability for 33kV overhead distribution systems, primary substations, wind farms, solar collector stations, mining facilities, and railway power networks.
Unlike conventional oil or SF6 switchgear, the High Voltage Vacuum Circuit Breaker platform eliminates insulating oil leakage and greenhouse gas emissions while significantly reducing maintenance frequency. It also shares the proven interrupting technology used in the 40.5KV Vacuum Circuit Breaker, providing utilities with consistent operating principles across different voltage classes. For outdoor substations requiring higher automation levels, the breaker can be integrated alongside the 35KV Substation Circuit Breaker and intelligent protection systems. Customers upgrading overhead feeder protection can also coordinate this solution with the Outdoor Vacuum Circuit Breaker series to create a standardized medium-voltage switching platform.
| Technical Item | Specification |
|---|---|
| Rated Voltage | 33 kV |
| Rated Frequency | 50 / 60 Hz |
| Rated Current | 630A / 1250A / 1600A / 2000A |
| Rated Short Circuit Breaking Current | 20kA / 25kA / 31.5kA |
| Rated Making Current | 50kA / 63kA / 80kA Peak |
| Short-Time Withstand Current | 25kA, 3 Seconds |
| Lightning Impulse Withstand Voltage | 170kV Peak |
| Power Frequency Withstand Voltage | 70kV (1 Minute) |
| Mechanical Life | ≥10,000 Operations |
| Electrical Endurance | E2 Class |
| Operating Mechanism | Motor-Charged Spring Mechanism |
| Opening Time | ≤40 ms |
| Total Breaking Time | ≤60 ms |
| Operating Sequence | O-0.3s-CO-180s-CO |
| Protection Degree | Main Tank IP67 / Control Cabinet IP65 |
| Operating Temperature | -40℃ to +55℃ |
| Installation Altitude | ≤2000m (Higher Available) |
| Control Voltage | 24VDC / 48VDC / 110VDC / 220VDC / 220VAC |
| Communication | IEC61850, DNP3, Modbus RTU/TCP |
| Applicable Standards | IEC 62271-100, IEC 62271-1, ANSI C37.09 |
| Comparison Item | Our 33KV Outdoor Circuit Breaker | Typical Conventional Outdoor Breaker |
|---|---|---|
| Interrupting Medium | Vacuum | Oil or SF₆ Gas |
| Environmental Impact | No SF₆ emissions | Possible greenhouse gas leakage |
| Routine Maintenance | Very Low | Frequent inspection required |
| Mechanical Reliability | ≥10,000 Operations | Generally Lower |
| Digital Grid Integration | Native SCADA Communication | External Gateway Usually Required |
| Installation Time | Modular & Factory Tested | Longer Site Assembly |
| Operating Cost | Lower Total Cost of Ownership | Higher Lifetime Maintenance Cost |
| Renewable Energy Compatibility | Excellent | Limited on Older Designs |
Vacuum interruption provides extremely fast arc extinction, minimal contact wear, long mechanical life, and eliminates the environmental risks associated with insulating oil or SF₆ gas.
Yes. Composite insulators, stainless steel hardware, anti-corrosion coatings, and optional extended creepage distances allow reliable operation in coastal, desert, chemical, and heavy industrial environments.
Yes. It can integrate with SCADA and digital substations through IEC 61850, Modbus, or DNP3 communication protocols, enabling remote monitoring, diagnostics, event recording, and control.
Absolutely. It is widely used in wind farms, photovoltaic power stations, battery energy storage systems (BESS), and utility collector substations where high switching reliability and low maintenance are essential.
The sealed vacuum interrupter requires virtually no routine maintenance. Periodic inspections generally focus on the operating mechanism, control cabinet, and electrical connections, greatly reducing lifecycle service costs compared with traditional technologies.
Yes. Optional configurations include different current ratings, CT/PT combinations, operating voltages, communication protocols, mounting structures, anti-condensation heaters, surge arresters, and project-specific control logic for utility or EPC requirements.
We provide complete OEM and project engineering support for global utilities, EPC contractors, and switchgear manufacturers. Services include electrical scheme optimization, CAD drawings, protection coordination assistance, FAT testing, multilingual documentation, customized control cabinets, international certification support, and worldwide technical service. Every 33KV Outdoor Circuit Breaker is factory-tested before shipment to ensure dependable field performance and long-term operational reliability.
