Whatsapp
Modern electrical distribution systems require more than simple fault interruption—they demand intelligent automation that minimizes outages and improves grid resilience. The 33KV Outdoor Recloser Circuit Breaker is specifically developed for smart distribution networks where rapid fault isolation and automatic service restoration are essential. Integrating advanced vacuum interruption technology with a digital recloser controller, this solution automatically distinguishes temporary faults from permanent faults, restoring power within seconds whenever possible and dramatically reducing customer outage time.
As a high-performance member of our medium-voltage switching portfolio, the 33KV Distribution Recloser Circuit Breaker combines intelligent feeder automation with the proven reliability of the 33KV Vacuum Circuit Breaker. It also shares the environmentally friendly vacuum interruption technology used in our High Voltage Vacuum Circuit Breaker series while providing automatic reclosing capabilities beyond a traditional 33KV Outdoor Circuit Breaker. The result is a smarter switching device that helps utilities reduce SAIDI and SAIFI indexes while lowering maintenance costs and improving network reliability.
Unlike conventional outdoor breakers that simply interrupt fault current, this 33KV Outdoor Recloser Circuit Breaker actively participates in distribution automation. Its embedded intelligent controller continuously monitors feeder conditions, analyzes fault characteristics, executes programmable reclosing sequences, records disturbance events, and communicates with SCADA or Distribution Management Systems (DMS). This transforms passive protection equipment into an active component of a self-healing electrical grid.
| Parameter | Specification |
|---|---|
| Rated Voltage | 33 kV |
| Rated Frequency | 50 / 60 Hz |
| Rated Continuous Current | 630 A / 800 A / 1250 A |
| Rated Short Circuit Breaking Current | 12.5 kA / 16 kA / 20 kA |
| Rated Making Current | 31.5 kA / 40 kA / 50 kA Peak |
| Power Frequency Withstand Voltage | 70 kV (1 min) |
| Lightning Impulse Withstand Voltage | 170 kV Peak |
| Mechanical Endurance | ≥10,000 Operations |
| Electrical Endurance | E2 Class |
| Auto Reclosing Shots | 1–4 Programmable |
| Dead Time Setting | 0.1–300 Seconds Adjustable |
| Operating Sequence | O-0.3s-CO-15s-CO-30s-CO |
| Operating Mechanism | Motor-Charged Spring |
| Opening Time | ≤40 ms |
| Total Breaking Time | ≤60 ms |
| Control Voltage | 24V / 48V / 110V / 220V DC |
| Auxiliary Supply | 110V-240V AC Optional |
| Communication Protocols | IEC61850, DNP3, Modbus RTU/TCP, IEC60870-5-104 |
| Protection Degree | Main Tank IP67, Control Cabinet IP65 |
| Operating Temperature | -40°C to +55°C |
| Installation Altitude | ≤2000m (Higher Available) |
| Applicable Standards | IEC 62271-111, IEC 62271-100, IEEE C37.60 |
| Comparison | Our 33KV Outdoor Recloser Circuit Breaker | Conventional Outdoor Circuit Breaker |
|---|---|---|
| Automatic Power Restoration | Supports Multi-Shot Auto Reclosing | Manual Restoration Required |
| Fault Analysis | Built-in Intelligent Controller | External Relay Required |
| Distribution Automation | Native Smart Grid Integration | Limited Automation |
| SCADA Communication | Multiple Communication Protocols Standard | Usually Optional |
| Fault Recording | Waveform & Event Recording | Generally Not Available |
| Maintenance | Very Low | Higher Periodic Maintenance |
| Installation Time | Factory Integrated Solution | Additional Relay Wiring Required |
| Total Ownership Cost | Lower Over Full Lifecycle | Higher Operational Cost |
| Suitable for Smart Grid | Excellent | Limited |
A standard outdoor circuit breaker interrupts fault current but typically requires manual or remote operator intervention before power is restored. A 33KV Outdoor Recloser Circuit Breaker automatically analyzes the fault, recloses after temporary faults, and permanently locks out only when a persistent fault is detected, greatly improving service continuity.
The controller typically supports one to four programmable reclosing shots. Utilities can independently configure dead time, protection curves, lockout logic, and restoration sequences according to network requirements.
The intelligent controller supports IEC 61850, DNP3, Modbus RTU/TCP, IEC 60870-5-101/104, and optional IEC 62351 cybersecurity features for modern utility communication systems.
Yes. The sealed vacuum interrupter, stainless steel control cabinet, UV-resistant insulation, anti-corrosion coating, and IP67 protection enable reliable operation in coastal regions, deserts, heavy industrial areas, and high-humidity climates.
Yes. It is widely deployed in wind farms, photovoltaic collector systems, battery energy storage stations (BESS), rural distribution feeders, and smart utility networks where automatic fault recovery improves overall system availability.
Yes. Authorized engineers can remotely modify protection parameters, reclosing sequences, communication settings, and firmware through the intelligent controller without visiting the installation site, significantly reducing maintenance time.
We provide comprehensive OEM and engineering services for utilities, EPC contractors, switchgear manufacturers, and power distribution integrators worldwide. Our capabilities include customized protection logic, controller programming, multilingual HMI interfaces, utility-specific communication protocols, project documentation, FAT testing, CAD drawings, branding, and complete technical support throughout the project lifecycle. Every 33KV Outdoor Recloser Circuit Breaker is fully factory tested before shipment to ensure dependable performance in modern automated distribution networks.
